How to Remove Stain Butcher Block 

Butcher block countertops are popular in modern households. Made from thick pieces of wood, they add a beautiful, natural aesthetic to the kitchen.

Here, we’ll look at how to remove stains on a butcher’s block countertop without ruining it.

Removing water and light food stains

If you are dealing with light food or water stains, using a lemon and salt scrub is a popular fix. Not only does this natural solution help to remove light stains, but it also leaves the butcher block smelling incredible. 

For this easy fix, you will need:

  • A fresh lemon, cut in half
  • Salt 
  • Warm water
  • A clean cloth

There are two methods you can use here. You can either create a paste with the lemon and salt, or you can use this faster method:

Step 1: Pour a generous amount of salt over the countertop.

Step 2: Grab half of the fresh lemon and use the side that has been cut to rub the salt into the butcher block. 

Step 3: Leave the butcher block to sit overnight, giving the lemon and salt plenty of time to work.

Step 4: Use a clean cloth and warm water to wipe the butcher block down in the morning. 

You should find this successfully removes light stains. However, if it doesn’t you may need to use a more intensive cleaning method. 

Removing tougher, darker stains from a butcher block

When you are dealing with darker or more stubborn stains, it calls for a tougher cleaning approach. Vinegar and Hydrogen peroxide can be combined to give the butcher block a deeper, more intensive clean. 

For this technique, you will need:

  • 1 tbsp hydrogen peroxide 
  • 1 cup warm water
  • A cloth or cotton ball
  • White vinegar 

It’s simple to use this cleaning hack, though you should take care to protect your hands when working with hydrogen peroxide. To get rid of dark, stubborn stains, follow the simple steps below.

Step 1: Mix the hydrogen peroxide and warm water together. 

Step 2: Depending upon how large the stain is, use a cotton ball or cloth to apply the solution to the butcher block. 

Step 3: Gently dab the stain with a little white vinegar before leaving the butcher block to sit for a few minutes. 

Step 4: Use a clean cloth and warm water to wipe any remaining solution, as well as the stain, off the butcher block. 

This method is often enough to shift darker, stubborn stains. However, you may still be able to see the stain. If vinegar and hydrogen peroxide hasn’t worked, there is another trick you can try. 

Giving the butchers block a total refresh 

For tough butcher block stains, sanding or bleaching the area is an affective option. These methods are especially great for mildew and deeper stains. It may take a little more effort, but the results they provide are fantastic. 

For the bleach method, you will need:

  • 1 tsp powdered bleach
  • 1 cup hot water
  • A sponge
  • Rubber gloves

Step 1: Mix the powered bleach with the hot water until it is fully dissolved.

Step 2: Wearing your rubber gloves, dip a clean sponge into the mixture and use it to scrub over the stain. Scrub the area for a couple of minutes.

Step 3: Leave the solution on the stain for around 10 minutes before rinsing the butchers block thoroughly. 

If you want to sand the butcher block down to eliminate deeper stains, it is best to use a 60-grit sandpaper. Try to avoid over-sanding any part of the block, and always finish by re-treating the wood. You should also make sure you sand the butcher’s block in the same direction as the wood grain. 

Things to Avoid when cleaning a butcher block 

Butcher’s blocks are porous, which means they should never be soaked with water. When using any cleaning method, make sure you use a damp cloth where needed, and dry the butcher’s block carefully after you have finished cleaning it.

Another thing to factor in is if you are using vinegar to clean the block. Avoid using high-strength vinegar as its acidity can cause issues for the wood, alongside the glue used to secure butchers block countertops. 

The above is some of the best tips and tricks you can use for how to remove stain butcher block issues. Remember, before trying out any cleaning method, you should first carry out a test. Use the cleaning solution on a small area of the butcher block and leave it for 24 hours. This will help you to determine whether the method is suitable. 

Leave a Comment